World
cup proven by some of the fastest athletes of the planet.
Durable,
precise
and incredibly light: no shortcuts to reduce weight.
Weight: 162g.(28h-XD)
Material: special 7075TXX.
Available Drillings: 24h, 28h, 32h.
Frame standard: "Rear Boost" thru-axle 148mm.
Cassette standards: Sram XD-Drive, Shimano M11s or Shima M12s.
Freehub system: hyper engineered front engagement featuring new 60 P.O.E.
Freehub bearings & seals: 2x 6803-2RS sealed cartridges, durable polyurethane Lip seal.
Hubshell bearings: 2x heavy duty 6903-2RS sealed cartridges with additional external O-r seal.
Axle construction: 17mm, multi-shaped and individually lapped to micro tolerances.
Bearing options: ABI Enduro 440-stainless, HDC Ceramic, XD15 Ceramic.
Micro-Tuner: easy to set external bearing preload system.
External sealing: polyurethane Lip seal / Soft-Touch o-ring.
Finishing: black anodized body, "hart coat" sides.
Graphics: laser etched.
Bearing
options
|
Lacing
instructions
|
Freewheel
options
|
36
p.o.e. XD Drive 36
p.o.e. Shimano MTB 11s |
||
Here
you will find pre-calculated
spoke lengths, spoke patterns and wheel building tips.
|
The
overall hub system is the world lighest but employs bigger bearings than most
competitors:
freehub mounts 2 corrosion resistant stainless bearings (6803-2rs), hubshell
rotates on 2 "heavy duty"
corrosion resistant stainless bearings (6903-2rs) that can handle 250kg each
in the worst static condition.
Bigger
bearings are mounted onto axles of a bigger diameter. This creates a stiffer
assembly that significantly increases bearing durability.
Our MTB hubs feature also additional external seals to keep moisture and dust
far from the 2RS bearing seals.
Oversized 17mm axle is multi-shaped and individually lapped to micro tolerances.
The new 60 P.O.E. freehub/floating ring mechanism has been released after 3 years of internal testing and 2 years of Open-Program tests.
It further enhances engagement quickness, increases overall lifespan and simplifies maintenance.
Specifically designed long-life polyurethane lip seal protects the freewheel mechanism.
Micro-tuner ensures a very precise hub bearing setting, low bearing friction, higher bearing durability and no play at the rim.
This external bearing preload device is very easy to set and integrates also an additional external Soft-Touch o-ring seal.
Straight
pull spokes increase wheel stiffness, reducing lateral flex and increasing reactivity
of torque transmission.
All this with a weight reduction too!
100% made in Italy